1. Open Kodi and click on Add-ons.
  2. Select My Add-ons then scroll down until you see PVR Clients
  3. Click on it and then click on PVR IPTV Simple Client.
  4. On the pop-up screen that follows select Enable.
  5. Then click on ‘Configure’. This is the slightly tricky bit, so follow the next two stages carefully
  6. If you have a URL that connects to your M3U list, make sure the screen says Remote Path (Internet Address) then double-click where it says M3U Playlist URL. Type the URL of your M3U list into the text box and then click ok. OR If you have downloaded your M3U list onto your streaming device, click the up or down arrow next to where it says Remote Path (Internet Address). This should now change to read Local Path (including Local Network). Click where it says M3U Playlist Path, and set the location of your M3U playlist file. Then click ok.
  7. Kodi should now automatically upload your M3U list. It will inform you that it needs to Restart before the channels become available. You will need to do this manually.
  8. Once this process has finished, on the Kodi home screen and select the TV option. You should now see all of your live TV channels listed and available to watch.
  1. Install the app on your device and open the app
  2. Click on the red button and write down your MAC address
  3. Go to https://siptv.app/mylist/ enter your MAC address
  4. Enter the M3U line provide by us and click “send”
  5. Restart your app and your channels will load
  6. If your device is connected via Wifi, it could take longer for the app to load the channels.Also the app could show the message “Server connection timeout”
  7. The app will expire after a 7 day free trial.
    1. If you like the app go to https://siptv.app/activation/
    2. Enter your MAC Address and email
    3. Activate your app with a one time payment of €5,49
  1. Download the app on to your device and open it
  2. Go to Settings – General
  3. In Player 1 enter your full m3u URL
  4. Go to GUI ===> enable “show channels group as folder”
  5. IMPORTANT: from “playback” menu, choose the “decoder” or else you can,t watch some channels or any channels at all. On the device which we used for testing, “software” decoder worked best.
  6. Go to Advanced ===> enable download supposed logos
  7. After doing the necessary changes, you can “backup” your setting in a file from the “defaults” menu. so you can restore them later if anything happened to your perfect player.
  8. Now go back to main screen and wait for “perfect player” to download the playlist. It may take a while but it should work then.but it should work then.
  1. Login to your IPTV Dashboard for T2H or your IPTV Dashboard for GEN using the username and password of your m3u line
  2. Enter your MAC address and press save
  3. Now go on your MAG box to Settings/Servers/Portals
  4. At Portal 1 URL, enter the URL you got from us and click OK
  5. Now go to settings and Software Updates
  6. Under Update Method you will see HTTP, click on OK
  7. Click on the red button so the automatic update will start
  8. This will take about 5 minutes, your device will automatically shut down and start up
  9. You are now ready to go
  1. Open your app and go to setting / profiles
  2. Click ADD PROFILE, go to STB configuration and write down the MAC address
  3. Go to Portal settings and change Portal URL 1 into the one you have received from us
  4. Go back and save setting and profile
  5. Close your app and Login to your IPTV Dashboard for T2H or your IPTV Dashboard for GEN using the username and password of your m3u line
  6. Enter your MAC address and press save
  7. Start app again, your channels will now load
  1. Install the app on your device and open the app
  2. Enter just any name in the first field
  3. Fill in the username and password provided by us
  4. Login and go to settings ⇒ Automation
  5. Enable both options
  6. Start “Live Tv” your channels will load
  7. You are ready to go!

1.Download the right plugin corresponding to your device’s CPU architecture.(from the attachments)

CPU help info:

“Mips32el” is used for the most boxes. Example VU zero, Vu Duo, Zgemma and mostly above openpli 4 boxes or new images.
“Mipsel” is used for old boxes dm800 clones with old openpli 2.1
“sh4” is used for boxes like spark
“armv7a” is used by new boxes like vu 4k and gigablue sf4008
for other devices please search

2.Connect your device with a LAN cable to your PC
3.Download Putty
4.Connect to your device with telnet protocol in PuTTY and run one of these commands (depends on the CPU architecture)

opkg install http://config.streamstv.me:8080/enigma2/XtreamTV_0.1.1_armv7a.ipk
opkg install http://config.streamstv.me:8080/enigma2/XtreamTV_0.1.1_mips32el.ipk
opkg install http://config.streamstv.me:8080/enigma2/XtreamTV_0.1.1_mipsel.ipk
opkg install http://config.streamstv.me:8080/enigma2/XtreamTV_0.1.1_oe25_arm.deb
opkg install http://config.streamstv.me:8080/enigma2/XtreamTV_0.1.1_oe25_mips.deb
opkg install http://config.streamstv.me:8080/enigma2/XtreamTV_0.1.1_sh4.ipk

5.Connect your device to a monitor(TV) and run the plugin

If u want to remove the plugin from the box, u can write:

opkg remove XtreamTV

If you live in the UK and you have Sky or Virgin Media as internet provider, you will need to change your security settings. Sky and Virgin are blocking our services via their internet.

For Sky please click here!

For Virgin Media please click here!

What to do if your Infomir box gives the warning that access to the webpage you are trying to visit has been blocked?

To fix this problem you will need to downgrade the software of your box.

  1. Get a USB drive and format it to FAT32 (Preferable max 2GB)
  2. Create a new folder on the drive named (MAG254 or MAG322) according to your box.
  3. Download the correct file below, unzip it and place in folder
    *mag250 https://mega.nz/#F!Q4YkDKQT!46cNMVY-KRNIm3tYoGR0rg
    *mag254 https://mega.nz/#F!k0ImBCKA!bbNSbss1wXmOfxGK1Y2KdQ
    *mag256 https://mega.nz/#F!14QSBaqJ!95LkP7PoVbnTAA-2BqL7NA
    *mag322 https://mega.nz/#F!w0JE1ILA!6tDfPWlkbG1c6tuA4bTSew
    *mag324 https://mega.nz/#F!1hICAQwI!KsxN8jSyBs3Nx6ClJhuMog
    *mag351 https://1drv.ms/f/s!AvIxx3ltAugTgrkHu9jnukl60SLLeA
  4. Put the USB drive into the box
  5. Pull out the power plug on the back
  6. Press the menu button on the remote control
  7. Keep pressing the button and put the power plug back in
  8. In the menu go to Upgrade Tools
  9. Go to Upgrade Software and choose YES
  10. Wait until the Software update has finished and the box has been restarted and disable the Auto update function
  11. You are ready to go